Herschel iQ T1 Room Thermostat & Receiver

SKU
12500536
In stock
Our Price £73.99 inc. VAT
  • Product Details
    • Control Unlimited Herschel Heaters
    • Customisable Programming
    • Comfort, Energy Saving & Holiday Modes
    • Open Window Function
    • Large, Intuitive Display Screen
    • Local Heat Boost Function 
    • Wall Mounted or Freestanding Installation
    • Suitable for Bathrooms (Zone 3 Only)
  • Product Specifications
    More Information
    SKU 12500536
    Brand Herschel
    Product Weight (kg) 0.36
    Depth (mm) 20
    Height (mm) 84
    Width (mm) 119
    Dual Control No
    Programmable Yes
    Tariff Switching No
    Manual or Digital Digital
    Wi-Fi Controllable No
    Touchscreen Yes
    IP Rating IP20
    Suitable for Bathrooms Zone 3 Only
    Maximum Load (Amps) 10
    Display LCD Display
  • Manuals & Installation

    View the Herschel iQ T1 Thermostat User Guide here.

    View the Herschel iQ R1 Receiver User Guide here.

    View the Herschel iQ Control Guide here.

    The T1 thermostat can be wall mounted using the mounting plate and included fittings. Alternatively, it can be used free standing with the included stand. Make sure your thermostat is installed somewhere which will provide an accurate temperature reading. It should not be installed in a known hot or cold spot.

    The R1 receivers must be connected to your heaters and wired into your mains by a professional electrician. This is not a DIY job.

    As with all control units which use a radio frequency, the thermostat and receivers should be placed at least 1 metre away from other electrical appliances such as radios, TVs, routers or computers.

    The T1 thermostat should not be hung in a bathroom. If you want to control panels in your bathroom, you will need to make sure the panel is wired into the receiver in a location which falls outside the “wet” bathroom zones – namely, at least 60cm away from any source of running or splashing water. Receivers must not be installed anywhere where there will be risk of water contact – whether by dripping, splashing, or touching with wet hands. If in doubt, do not install. Common sense should prevail.

  • Warranty
    All Herschel iQ units comes with a 1 Year Manufacturer’s Warranty. Please note: Building Regs (Part F) since 2006 require new or refurbished bathrooms to possess adequate ventilation (15 litres / second with 15 minute overrun). Where adequate ventilation
  • Delivery Info

    This item is available with free next working day delivery. Next working day delivery is available when you order before 12pm (excluding weekends).

    Orders of multiple items may be shipped on a pallet. If you are ordering multiple different items, we will always endeavour to dispatch your goods together. However, separate dispatches may be necessary if the items you have ordered are being shipped from different locations. Check our delivery page or speak to our customer service team for more information.

    Please be aware that delivery times and charges may be increased if you want the items delivered to addresses in the Scottish Highlands & Islands, or outside the UK mainland. This will be calculated when you enter your postcode at the checkout.

  • Product Specifications
    More Information
    SKU 12500536
    Brand Herschel
    Product Weight (kg) 0.36
    Depth (mm) 20
    Height (mm) 84
    Width (mm) 119
    Dual Control No
    Programmable Yes
    Tariff Switching No
    Manual or Digital Digital
    Wi-Fi Controllable No
    Touchscreen Yes
    IP Rating IP20
    Suitable for Bathrooms Zone 3 Only
    Maximum Load (Amps) 10
    Display LCD Display

Control all your infrared panels from one central location with the Herschel iQ T1 Room Thermostat & Receiver — providing fully customisable digital programming from an easy-to-use wireless interface.

What can it do?

The iQ T1 thermostat provides an intuitive wireless thermostat system which can be used to control an unlimited number of infrared panels. The T1 measures and maintains heat levels by switching your heaters off or on when the temperature moves above or below set levels. It can also be used to program your heating, with separate programs available for weekdays, Saturdays and Sundays. You can customise each program to suit your preferences. Each program is made up of 4 heating periods. You can adjust the temperature and time span of each of these periods.

The T1 also offers three manual settings which you can switch to at any time to temporarily override your programming. These are comfort, for instant heat; energy saving, for a reduced level of heat; and holiday, to switch your heating to a low level sufficient to protect against frozen pipes. You can also use the boost function, available on every heater in your system, to activate a 1-hour boost of heat from your chosen panel. The T1 also comes with a smart open window detection function, which saves energy by switching your panels off if it senses a sudden, dramatic drop in temperature. This can be overridden at the thermostat, or by using the boost function on individual heaters.

How does it work?

The T1 thermostat works wirelessly, using a radio frequency to send messages to the R1 receivers paired with the thermostat. Your Herschel heaters must be wired into an R1 receiver if you want to control them with the T1 thermostat. You can use the receivers to control several heaters each, provided the total load does not exceed 10 Amps. In a standard 230V power supply, this equates to a maximum total wattage of 2300w which can be controlled by one receiver. All the receivers connected to the T1 will receive the same commands; much like a central heating system controlled by a single thermostat, the T1 will switch all the heaters on and off at the same time. If you want to zone your heating – that is, use a different heating program in different parts of the house – you will need to purchase an additional T1 thermostat.

The iQ T1 and R1 system is not WiFi-controllable, so if you want to be able to control your heating remotely you might prefer to choose the iQ MD2 thermostat. Heaters wired into this hardwired alternative can be controlled by your choice of three methods: on-screen, via the intuitive touchscreen display; online, via the Smart Life app; or using your voice, with Alexa and Google Home integration.

The T1 thermostat comes with a single R1 receiver as standard. If you want to use your thermostat to control additional panels, you will need to purchase additional receivers.

The thermostat is battery operated and boasts a 200m wireless reach – although this will be slightly reduced if the signals are travelling through solid walls. The thermostat is accurate to ±0.5 °C, can control a range of temperatures from 5 – 30 °C, and can be wall mounted or used free standing on the stand provided. The iQ system should only be used with Herschel infrared heaters.

Please note, older versions of the R1 receiver will not work with the new, third generation T1 thermostat and vice versa. If you’re unsure what generation product you require, please contact our sales team.