Checkout using your account
Checkout as a new customer
Creating an account has many benefits:
Free Next Working Day Delivery
Manufacturer Warranty
Expert Support Available
Brand | |
---|---|
Product Weight (kg) | |
Depth (mm) | |
Height (mm) | |
Width (mm) | |
BTUs ΔT50 | |
Watts ΔT50 | |
BTUs ΔT30 | |
Watts ΔT30 | |
BTUs ΔT60 | |
Watts ΔT60 | |
Colour | |
Number of Bars | |
Inlet Size | |
Inlet Location | |
Pipe Centres (mm) | |
Pipe Centre to Floor (mm) | |
Wall to Centre Tapping (mm) | |
Projection from Wall (mm) | |
Max Pressure | |
Max System Temperature (°C) | |
Warranty |
Download the Terma radiator manual here.
Download the installation guide here.
Terma Crystal Designer Towel Rails must be professionally installed by a qualified plumber: this is not a DIY task.
These radiators have adjustable wall brackets which gives them a fitted depth of 83 - 91mm.
These items are available with free next working day delivery. Next working day delivery is available when you order before 12:30pm (excluding weekends).
Orders of multiple items may be shipped on a pallet. If you are ordering multiple different items, we will always endeavour to dispatch your goods together. However, separate dispatches may be necessary if the items you have ordered are being shipped from different locations. Check our delivery page or speak to our customer service team for more information.
Please be aware that delivery times and charges may be increased if you want the items delivered to addresses in the Scottish Highlands & Islands, or outside the UK mainland. This will be calculated when you enter your postcode at the checkout.
The unique aesthetic of the Terma Crystal offers a contemporary twist on traditional towel rail design. With its attractive diamond-shaped bars and emphasis on simplicity, it's a superb complement to any modern bathroom or kitchen that requires effective warmth. These Terma Crystal Designer Towel Rails are finished in Modern Grey, Sparkling Gravel and Soft White.
The BTUs are based on a standard ΔT of ΔT50. This means a difference of 50 °C between the desired temperature of your rooms and the average water temperature of your system. It’s the standard to use if your boiler has an average water temperature of 70 °C.
Of course, the temperature of the water in your system will affect the heat output of your radiators – and not all systems operate at the same temperature. If the water is hotter, the heat output will increase. If the water is cooler, the heat output will decrease, and you may need more radiators to heat the space. If your system has an average temperature of 80 °C – common in older boilers – you should use BTUs measured at ΔT60. If your system has an average temperature of 50 °C – typical for low energy eco boilers – you should use BTUs measured at ΔT30. You can find these values in the specification tab. Remember, all heat outputs are approximations only, affected by a variety of different factors. If you are at all unsure, give our customer service team a call before buying, or check with a qualified plumber.
Start adding items to your cart!