Terma Ribbon HWS Designer Radiator - RAL 7016 (1540 x 390mm)

SKU
12501700
Out of stock
Our Price £1,099.99 inc. VAT
  • Product Specifications
    More Information
    SKU 12501700
    Brand Terma
    Product Weight (kg) 29.99
    Depth (mm) 105
    Height (mm) 390
    Width (mm) 1540
    BTUs ΔT50 3375.9
    Material Low Carbon Steel
    Material Thickness (mm) 1.5
    Number of Bars 4
    Inlet Size 1/2" (15mm)
    Pipe Centres (mm) 50
    Pipe Centre to Floor (mm) N/A
    Wall to Centre Tapping (mm) 70
    Projection from Wall (mm) 114
    Max Pressure 0,7MPa
    Max System Temperature (°C) 95
    Safety Accreditation CE
  • Manuals & Installation

    This radiator must be professionally installed by a qualified plumber: this is not a DIY task. Valves are not supplied with the unit.

  • Warranty
    This radiator comes with an 8 Year Manufacturer's Warranty.
  • Delivery Info

    This non-stocked, bespoke product comes directly from the manufacturer and is available with free delivery. Please allow 4 weeks for this item to arrive. Due to the fact it is custom made, this item is non-refundable unless damaged.

    Orders of multiple items may be shipped on a pallet. If you are ordering multiple different items, we will always endeavour to dispatch your goods together. However, separate dispatches may be necessary if the items you have ordered are being shipped from different locations. Check our delivery page or speak to our customer service team for more information.

    Please be aware that delivery times and charges may be increased if you want the items delivered to addresses in the Scottish Highlands & Islands, or outside the UK mainland. This will be calculated when you enter your postcode at the checkout.

  • Product Specifications
    More Information
    SKU 12501700
    Brand Terma
    Product Weight (kg) 29.99
    Depth (mm) 105
    Height (mm) 390
    Width (mm) 1540
    BTUs ΔT50 3375.9
    Material Low Carbon Steel
    Material Thickness (mm) 1.5
    Number of Bars 4
    Inlet Size 1/2" (15mm)
    Pipe Centres (mm) 50
    Pipe Centre to Floor (mm) N/A
    Wall to Centre Tapping (mm) 70
    Projection from Wall (mm) 114
    Max Pressure 0,7MPa
    Max System Temperature (°C) 95
    Safety Accreditation CE

For bold, statement heating, look no further than the Terma Ribbon HWS designer radiator. This heater has a powerful industrial aesthetic to complement modern interiors and will make a superb solution for domestic and commercial properties alike.

This product is available at our Express Bi-Folding Doors showroom in Leeds. This bespoke item comes in a range of different sizes and finishes to suit all tastes, so please call our sales team on 0330 880 7008 to discuss the various options available to you.

The specified BTUs are based on a standard ΔT of ΔT50. This means a difference of 50 °C between the desired temperature of your rooms and the average water temperature of your system. It’s the standard to use if your boiler has an average water temperature of 70 °C.

Of course, the temperature of the water in your system will affect the heat output of your radiators – and not all systems operate at the same temperature. If the water is hotter, the heat output will increase. If the water is cooler, the heat output will decrease, and you may need more radiators to heat the space. If your system has an average temperature of 80 °C – common in older boilers – you should use BTUs measured at ΔT60. If your system has an average temperature of 50 °C – typical for low energy eco boilers – you should use BTUs measured at ΔT30. You can find these values in the specification tab. Remember, all heat outputs are approximations only, affected by a variety of different factors. If you are at all unsure, give our customer service team a call before buying, or check with a qualified plumber.

Please note: this product image is for illustrative purposes only and the colour of the product may vary. Valves are not supplied with the unit.